Saturday, September 20, 2008

How can I use computer aided design

CAD Design

CAD stands for Computer Aided Design or Computer Aided Drafting.  CAD was developed in the early 60s.  Today it is the premier way to design, develop and optimized products.People use computer aided design daily to design darn near every product that you see when you look around.  Generally, designers use CAD to design a product, and then produce prints to manufacture that product.  A print is a picture of a part or assembly that is very exact.  It includes the dimensions and a parts list used to manufacture a product.


CAD Design is the use of computer based software packages that assist engineers, architects and other design professionals in their designs. Computer-aided design is the part of the Main design process and involves both software and at times hardware. Current software packages range from 2D vector based drafting systems to 3D solid and surface modelers.
Computer Aided Drafting software packages can generally be broken into two groups.  The groups are 2-D drafting packages or 3-D drafting packages.  Most all software packages are moving to 3-D design.  3-D design is really the next generation of CAD.  Utilizing 3-D design, engineers can make a model of their product.They can review this model for any defects before it is ever manufactured.


CAD is used to develop products.Computer aided design is mainly used for engineering of models and drawing parts.  It is also used throughout the engineering process from concept to design of products.  These products can be used by end consumers or used in other products.  For example, you can design a bolt in CAD, and then use it in a Sub-Assembly in a planetary, which is a part of an earth-moving machine.  CAD is also used in the design of tools and machinery.  Finally, it is used in the design of all types of buildings from sheds to shopping malls.

Print Reading and Drafting
When I went through college I learned how to read prints and draft.  We had a bag of physical tools that we purchased and hauled around campus.  T-Squares, French Curves, compasses, pencils and erasers filled this bag.  Then you had a pad of drafting paper and a drafting desk.  You would pin or tape the paper down and begin drawing or drafting.
Drafting paper has a grid to help keep you aligned as you began you design.  In CAD, there is a grid you snap to, or guides to keep you straight.  We had hard plastic templates to draw curves.Computer aided design software as many tools to draw both curves and lines.  We had calculators to figure out distances and ratios.  CAD does this automatically.


Computer aided design replace drafting.CAD moved the same process into a flexible environment.  CAD has also helped out with networking of designs.  Different designers and engineers can work on the same assembly in different parts at the same time.This effort moves the process along much quicker.


However, as far as print reading goes, that is about the same as it was before.  Drafting outputs prints and CAD outputs prints.  A human still needs to be able to read them and make sense of them.An advantage of computer-aided design is that it is much more standardized.  Many times before, prints were unique to their maker.  Similar to handwriting, you could not always figure out what the engineer wanted to convey to you.  CAD cleans all that up.

How do I translate my design into the computer?
This is how I view CAD.  You learn a CAD software interface and begin the translation of your idea into the computer.  This usually takes some time and thinking.  Many times your idea and design will be revised as you discover things you have missed.While you are programming your design, your idea begins to take shape inside of the computer.  Now you can share it with others.

Different Design Views
In Drafting and CAD there are different views.  These are viewpoints of your part or project from different sides.  We need these different viewpoints to be able to describe our project accurately.  Think of it like seeing an elephant from the front.  You have no idea what the side or rear end of an elephant looks like.  To be able to accurately convey the elephant to another person you need multiple views.

The main print or design views are:
Front View
Top View
Right Side View
Isometric View

CNC Information Free Community Site:
If you would like to know more about CNC, head on over to http://www.cncinformation.com
You can join for Free and you get two free CNC ebooks. One is a GCode Quick Guide and the other is the CNC Info Site eBook. You also get access to the Free Video Series...Image to CNC Art when you join the community.

No comments: